This filter/receiver has a quick release of the pivoting top plenum which provides easy access to the top removal style filter cartridges. The filter media is a Spun Bonded Filter Cartridge with 45 Pleats per element. No support cage is required.
STANDARD FEATURES
Clean air plenum with clean air outlet stub
Jet pulse cleaning complete with:
Compressed air header and diaphragm valves
Internal air piping
Adjustable pulse timer board and solenoids mounted in a NEMA 4 enclosure
Spun bonded polyester cartridge media with 45 pleats per element
Galvanized steel bag cages
Filter housing with mounting flange and hinged access door
Magnehelic differential pressure gauge with filter
60 Degree hopper with radial inlet (Style 3 only)
Support lugs (Style 3 only)
OPTIONAL FEATURES
Available in carbon steel or stainless steel construction
Pneumatic receiver section consisting of a tangential inlet and internal, cyclonic ring to protect the filter media from direct contact by the product
Radial inlet with internal deflector plate to protect the filter media from direct contact by the product
NEMA 4X or NEMA 7/9 timer enclosure
Support legs
Maintenance access ladder and platform
Inspection/Access opening
Industrial/Food grade epoxy interior
Smooth not Flush (80 grit) or Smooth and Flush (120 grit) weld seams
70 Degree hopper slope
Asymmetric hopper configuration (offset)
Explosion relief vent
Flanged product inlet/clean air outlet
Additional sidewall height to provide surge/storage capacity
Pulse on demand differential pressure gauge and/or switch
Need a Quote, General Dimension Drawing or a Product Datasheet?
